
Table of Contents
You press the power button. The lights come on, the fan spins, maybe you even hear the Windows startup sound. But the screen stays completely black.
It’s one of the scariest things a laptop can do, because it looks like the whole thing has died. Usually it hasn’t. Most black screens come down to the display not waking up, Windows getting stuck, or a driver misbehaving, and you can fix all of those yourself.
The trick is working out which one you’re dealing with. Here’s the order I go through, from a ten-second shortcut to the checks that tell you it’s hardware.
First: is it the screen or the whole laptop?
Before you try anything, look and listen for clues:
- Is the power light on, and does the keyboard backlight or Caps Lock light respond when you press the key?
- Can you hear the fan, or the Windows startup sound?
- Do you see anything at all, even for a second, such as the laptop maker’s logo or a blinking cursor?
If the laptop shows signs of life but the screen is black, the problem is most likely the display or Windows. Keep going.
If there are no lights and no sound at all, the laptop isn’t turning on. Check the charger and jump to Step 3 (the power drain).
Try one more thing: shine your phone’s torch at the screen at an angle, close up. If you can faintly see the Windows desktop or login screen, the screen is working but its backlight isn’t. That usually means a hardware fault with the backlight, or the brightness turned all the way down.
Step 1: Wake the display with a keyboard shortcut
Press Windows key + Ctrl + Shift + B, all together.
This restarts your graphics driver. Microsoft says you’ll hear a beep or see the screen flicker if it worked. It’s the single quickest fix for a black screen, and it works more often than you’d think, especially when the laptop has just woken from sleep.
While you’re at it:
- Press the brightness up key a few times. On many laptops it’s a function key with a sun icon, and you may need to hold the Fn key too.
- Press any key or move the mouse, in case the laptop is just asleep.
Step 2: Check the display mode
Windows may be sending the picture to a TV, projector or monitor you used earlier, instead of the laptop’s own screen.
- Press Windows key + P.
- Press P again, then Enter. Wait a few seconds.
- Repeat a few times. Each press switches between modes such as PC screen only, Duplicate and Extend.
If the picture comes back, choose PC screen only.
Also unplug any external monitor, docking station, HDMI cable or USB-C hub, then restart the laptop.
Step 3: Do a hard reset (power drain)
A hard reset clears leftover electrical charge that can stop a laptop starting properly. It doesn’t touch your files.
- Hold the power button for about 20 seconds until the laptop turns off completely.
- Unplug the charger and disconnect everything: USB drives, mouse, headphones, cables.
- If your laptop has a removable battery, take it out.
- Hold the power button for another 15 to 20 seconds to drain any remaining power.
- Put the battery back in, plug in only the charger, and turn the laptop on.
If the laptop has been completely dead, leave it on charge for at least 30 minutes first. A fully drained battery can stop it showing anything for a while.
Step 4: Test with an external monitor or TV
This test tells you whether the problem is the laptop’s screen or the laptop itself.
- Connect the laptop to a TV or monitor with an HDMI or USB-C cable.
- Turn on the laptop and press Windows key + P to switch to Duplicate or Second screen only.
What it tells you:
- If the picture appears on the TV or monitor, the laptop is working. The problem is the laptop’s own screen, its backlight or the cable inside the hinge. Back up your files while you can, then get the screen repaired.
- If nothing appears there either, the problem is Windows, a driver or the laptop’s hardware. Keep going.
Step 5: Check whether the BIOS screen appears
The BIOS (or UEFI) is the setup screen that runs before Windows starts. If you can see it, your screen and graphics hardware are working, and the problem is Windows.
Turn the laptop off, then turn it on and immediately tap the setup key over and over. It’s usually one of these:
- F2 on many Dell, Lenovo, Asus and Acer laptops
- Esc or F10 on HP laptops
- Delete on some others
If the setup screen appears, exit without changing anything and move to Step 6.
If you see nothing even here, the problem is almost certainly hardware. Skip to “When it’s hardware” below.
Many laptop makers also have a built-in hardware test. On Dell laptops, tap F12 at startup and choose Diagnostics. On HP laptops, tap Esc and then F2 for HP PC Hardware Diagnostics. These can test the screen, memory and other parts.
Step 6: Black screen after you sign in, or with only a cursor
If you get as far as the login screen, or you see a mouse cursor on a black screen, Windows itself is stuck.
- Press Ctrl + Alt + Delete. If a blue menu appears, choose Task Manager.
- In Task Manager, find Windows Explorer, right-click it and choose Restart.
- If Windows Explorer isn’t in the list, click Run new task (or File, then Run new task), type explorer.exe and press Enter.
Your taskbar and desktop should come back. If this keeps happening, the next step will usually fix it.
Step 7: Start in safe mode and fix the display driver
A faulty or recently updated graphics driver is one of the most common causes of a black screen, especially straight after a Windows update.
Get into safe mode
If Windows won’t start normally, you can reach safe mode through the recovery screen:
- Turn the laptop on. As soon as the maker’s logo appears, hold the power button for 10 seconds to turn it off.
- Repeat this two or three times. Windows should then show Preparing Automatic Repair or a blue recovery screen.
- Choose Advanced options, then Troubleshoot, then Advanced options, then Startup Settings, then Restart.
- When the list appears, press 5 or F5 for Safe Mode with Networking.
If the laptop asks for a BitLocker recovery key along the way, don’t panic. It’s normal after repeated forced restarts. You’ll find the key in your Microsoft account at aka.ms/myrecoverykey, from your phone.
Roll back or update the driver
- In safe mode, right-click Start and open Device Manager.
- Expand Display adapters.
- Right-click your graphics card and choose Properties, then the Driver tab.
- If the black screen started after an update, click Roll Back Driver. Otherwise, close this window, right-click the graphics card again and choose Update driver.
- Restart normally.
You can also download the latest graphics driver from your laptop maker’s support website, which is often more reliable than Windows’ own version.
Step 8: Undo a recent update or change
If the black screen started after a Windows update or a new program, go back to how things were.
From the same blue recovery screen (Troubleshoot, then Advanced options), you can choose:
- Uninstall Updates, to remove the latest quality or feature update.
- System Restore, to return Windows to a restore point from before the problem started. Your files aren’t affected, but recently installed apps may be removed.
When it’s hardware
If none of the steps above helped, and especially if you couldn’t see the BIOS screen and an external monitor showed nothing, the problem is most likely physical. Common causes:
- A failed screen, backlight or display cable (the external monitor works, the laptop screen doesn’t)
- Faulty memory (RAM), sometimes signalled by beeps or flashing lights at startup
- A failed motherboard or graphics chip
- Liquid damage, even from a small spill
Many laptops use beep patterns or blinking Caps Lock or power lights to report hardware faults. Count them, and look up the pattern on your laptop maker’s support website for your model. It tells a repair shop exactly where to look.
If your laptop is under warranty, contact the maker before opening it or taking it to a third-party shop.
Quick Answers
Why does my laptop turn on but the screen stays black?
Usually the display didn’t wake, Windows is sending the picture to another screen, Windows got stuck at startup, or a graphics driver failed. Less often, the screen, backlight or another part has failed.
What is the shortcut to fix a black screen on Windows?
Press Windows key + Ctrl + Shift + B. It restarts the graphics driver. A beep or a flicker means it worked.
How do I fix a black screen with only a cursor?
Press Ctrl + Alt + Delete, open Task Manager and restart Windows Explorer. If it isn’t listed, use Run new task and type explorer.exe.
How do I get into safe mode when my screen is black?
Turn the laptop off during startup two or three times to open the recovery screen. Then choose Troubleshoot, Advanced options, Startup Settings, Restart, and press 5 or F5.
How do I know if my laptop screen is broken?
Connect it to a TV or monitor. If the picture appears there but not on the laptop, the laptop screen, backlight or display cable has probably failed.
Can a black screen be fixed without losing data?
In most cases, yes. None of the steps in this guide erase your files. If it turns out to be a hardware fault, a repair shop can usually recover your data from the drive.








